Tied
PN6 130mm Length NOTESRBU Twin sphere EPDM Union End Connectors.
Union ended Connectors have a standard length of 200mm +/- 5%, with a nylon reinforced EPDM twin sphere body terminated with galvanised malleable female BSP unions. The Maximum:- working pressure is 10bar / temperature 82.deg.C. Applications cover heating & chilled water services. The products must be installed in accordance with our fitting instructions and periodically inspected. Nitrile NBR connectors with brass unions are also available on request.
AU6 Union ended Expansion bellows
This range of bellows is designed to compensate thermal movement in heating and hot water circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated with either stainless steel or galvanised malleable iron female bellows. Maximum working pressure is 6bar / temperature 100.deg.C
CU6 Copper Spigot tail Bellows
This range of bellows is designed to compensate thermal movement in a multitude of copper pipeline circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated either end with a short copper spigot tail which can be connected to adjoining pipework with lead free solder copper or compression fittings. The working temperature / pressure will be governed by the fittings used but a rough guide is 6bar / 100.dg.c
RBU Twin sphere EPDM Union End Connectors.
Union ended Connectors have a standard length of 200mm +/- 5%, with a nylon reinforced EPDM twin sphere body terminated with galvanised malleable female BSP unions. The Maximum:- working pressure is 10bar / temperature 82.deg.C. Applications cover heating & chilled water services. The products must be installed in accordance with our fitting instructions and periodically inspected. Nitrile NBR connectors with brass unions are also available on request.
AU6 Union ended Expansion bellows
This range of bellows is designed to compensate thermal movement in heating and hot water circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated with either stainless steel or galvanised malleable iron female bellows. Maximum working pressure is 6bar / temperature 100.deg.C
CU6 Copper Spigot tail Bellows
This range of bellows is designed to compensate thermal movement in a multitude of copper pipeline circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated either end with a short copper spigot tail which can be connected to adjoining pipework with lead free solder copper or compression fittings. The working temperature / pressure will be governed by the fittings used but a rough guide is 6bar / 100.dg.c
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 1.1/4″ x 130mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 1.1/2″ x 130mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 2.0″ x 130mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 2.1/2″x 130mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 3.0″ x 130mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 4.0″ x 130mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 5.0″ x 130mm
Euroflex 427 BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 6.0″ x 130mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 8.0″ x 130mm
PN16 130mm Length NOTESRBU Twin sphere EPDM Union End Connectors.
Union ended Connectors have a standard length of 200mm +/- 5%, with a nylon reinforced EPDM twin sphere body terminated with galvanised malleable female BSP unions. The Maximum:- working pressure is 10bar / temperature 82.deg.C. Applications cover heating & chilled water services. The products must be installed in accordance with our fitting instructions and periodically inspected. Nitrile NBR connectors with brass unions are also available on request.
AU6 Union ended Expansion bellows
This range of bellows is designed to compensate thermal movement in heating and hot water circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated with either stainless steel or galvanised malleable iron female bellows. Maximum working pressure is 6bar / temperature 100.deg.C
CU6 Copper Spigot tail Bellows
This range of bellows is designed to compensate thermal movement in a multitude of copper pipeline circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated either end with a short copper spigot tail which can be connected to adjoining pipework with lead free solder copper or compression fittings. The working temperature / pressure will be governed by the fittings used but a rough guide is 6bar / 100.dg.c
RBU Twin sphere EPDM Union End Connectors.
Union ended Connectors have a standard length of 200mm +/- 5%, with a nylon reinforced EPDM twin sphere body terminated with galvanised malleable female BSP unions. The Maximum:- working pressure is 10bar / temperature 82.deg.C. Applications cover heating & chilled water services. The products must be installed in accordance with our fitting instructions and periodically inspected. Nitrile NBR connectors with brass unions are also available on request.
AU6 Union ended Expansion bellows
This range of bellows is designed to compensate thermal movement in heating and hot water circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated with either stainless steel or galvanised malleable iron female bellows. Maximum working pressure is 6bar / temperature 100.deg.C
CU6 Copper Spigot tail Bellows
This range of bellows is designed to compensate thermal movement in a multitude of copper pipeline circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated either end with a short copper spigot tail which can be connected to adjoining pipework with lead free solder copper or compression fittings. The working temperature / pressure will be governed by the fittings used but a rough guide is 6bar / 100.dg.c
Albion 450 BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 1.1/2″ x 130mm
Albion 450 BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 2.0″ x 130mm
Albion 450 BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 2.1/2″x 130mm
Albion 450 BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 3.0″ x 130mm
Albion 450 BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 4.0″ x 130mm
Albion 450 BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 5.0″ x 130mm
Albion 450 BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 6.0″ x 130mm
Albion 450 BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 8.0″ x 130mm
Albion 450 6.0″ PN16/130 Tied Bellows EPDM (-20 / 100.deg C)
Albion 450 BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 10.0″ x 130mm
Albion 450 BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 12.0″ x 130mm
BS10 D/E 130mm Length NOTESRBU Twin sphere EPDM Union End Connectors.
Union ended Connectors have a standard length of 200mm +/- 5%, with a nylon reinforced EPDM twin sphere body terminated with galvanised malleable female BSP unions. The Maximum:- working pressure is 10bar / temperature 82.deg.C. Applications cover heating & chilled water services. The products must be installed in accordance with our fitting instructions and periodically inspected. Nitrile NBR connectors with brass unions are also available on request.
AU6 Union ended Expansion bellows
This range of bellows is designed to compensate thermal movement in heating and hot water circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated with either stainless steel or galvanised malleable iron female bellows. Maximum working pressure is 6bar / temperature 100.deg.C
CU6 Copper Spigot tail Bellows
This range of bellows is designed to compensate thermal movement in a multitude of copper pipeline circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated either end with a short copper spigot tail which can be connected to adjoining pipework with lead free solder copper or compression fittings. The working temperature / pressure will be governed by the fittings used but a rough guide is 6bar / 100.dg.c
RBU Twin sphere EPDM Union End Connectors.
Union ended Connectors have a standard length of 200mm +/- 5%, with a nylon reinforced EPDM twin sphere body terminated with galvanised malleable female BSP unions. The Maximum:- working pressure is 10bar / temperature 82.deg.C. Applications cover heating & chilled water services. The products must be installed in accordance with our fitting instructions and periodically inspected. Nitrile NBR connectors with brass unions are also available on request.
AU6 Union ended Expansion bellows
This range of bellows is designed to compensate thermal movement in heating and hot water circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated with either stainless steel or galvanised malleable iron female bellows. Maximum working pressure is 6bar / temperature 100.deg.C
CU6 Copper Spigot tail Bellows
This range of bellows is designed to compensate thermal movement in a multitude of copper pipeline circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated either end with a short copper spigot tail which can be connected to adjoining pipework with lead free solder copper or compression fittings. The working temperature / pressure will be governed by the fittings used but a rough guide is 6bar / 100.dg.c
Euroflex BS10:D/E (-20 / 100.C) Tied flanged EPDM Bellows. 1.1/4″ x 130mm
Euroflex BS10:D/E (-20 / 100.C) Tied flanged EPDM Bellows. 1.1/2″ x 130mm
Euroflex BS10:D/E (-20 / 100.C) Tied flanged EPDM Bellows. 2.0″ x 130mm
Euroflex BS10:D/E (-20 / 100.C) Tied flanged EPDM Bellows. 2.1/2″ x 130mm
Euroflex BS10:D/E (-20 / 100.C) Tied flanged EPDM Bellows. 3.0″ x 130mm
Euroflex BS10: E (-20 / 100.C) Tied flanged EPDM Bellows. 4.0″ x 130mm
Euroflex BS10:D/E (-20 / 100.C) Tied flanged EPDM Bellows. 5.0″ x 130mm
Euroflex BS10:D/E (-20 / 100.C) Tied flanged EPDM Bellows. 6.0″ x 130mm
Euroflex BS10:D/E (-20 / 100.C) Tied flanged EPDM Bellows. 8.0″ x 130mm
PN6 150mm Length NOTESRBU Twin sphere EPDM Union End Connectors.
Union ended Connectors have a standard length of 200mm +/- 5%, with a nylon reinforced EPDM twin sphere body terminated with galvanised malleable female BSP unions. The Maximum:- working pressure is 10bar / temperature 82.deg.C. Applications cover heating & chilled water services. The products must be installed in accordance with our fitting instructions and periodically inspected. Nitrile NBR connectors with brass unions are also available on request.
AU6 Union ended Expansion bellows
This range of bellows is designed to compensate thermal movement in heating and hot water circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated with either stainless steel or galvanised malleable iron female bellows. Maximum working pressure is 6bar / temperature 100.deg.C
CU6 Copper Spigot tail Bellows
This range of bellows is designed to compensate thermal movement in a multitude of copper pipeline circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated either end with a short copper spigot tail which can be connected to adjoining pipework with lead free solder copper or compression fittings. The working temperature / pressure will be governed by the fittings used but a rough guide is 6bar / 100.dg.c
RBU Twin sphere EPDM Union End Connectors.
Union ended Connectors have a standard length of 200mm +/- 5%, with a nylon reinforced EPDM twin sphere body terminated with galvanised malleable female BSP unions. The Maximum:- working pressure is 10bar / temperature 82.deg.C. Applications cover heating & chilled water services. The products must be installed in accordance with our fitting instructions and periodically inspected. Nitrile NBR connectors with brass unions are also available on request.
AU6 Union ended Expansion bellows
This range of bellows is designed to compensate thermal movement in heating and hot water circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated with either stainless steel or galvanised malleable iron female bellows. Maximum working pressure is 6bar / temperature 100.deg.C
CU6 Copper Spigot tail Bellows
This range of bellows is designed to compensate thermal movement in a multitude of copper pipeline circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated either end with a short copper spigot tail which can be connected to adjoining pipework with lead free solder copper or compression fittings. The working temperature / pressure will be governed by the fittings used but a rough guide is 6bar / 100.dg.c
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 1.1/4″ x 150mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 1.1/2″ x 150mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 2.0″ x 150mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 2.1/2″ x 150mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 3.0″ x 150mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 4.0″ x 150mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 5.0″ x 150mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 6.0″ x 150mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 8.0″ x 150mm
PN16 150mm Length NOTESRBU Twin sphere EPDM Union End Connectors.
Union ended Connectors have a standard length of 200mm +/- 5%, with a nylon reinforced EPDM twin sphere body terminated with galvanised malleable female BSP unions. The Maximum:- working pressure is 10bar / temperature 82.deg.C. Applications cover heating & chilled water services. The products must be installed in accordance with our fitting instructions and periodically inspected. Nitrile NBR connectors with brass unions are also available on request.
AU6 Union ended Expansion bellows
This range of bellows is designed to compensate thermal movement in heating and hot water circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated with either stainless steel or galvanised malleable iron female bellows. Maximum working pressure is 6bar / temperature 100.deg.C
CU6 Copper Spigot tail Bellows
This range of bellows is designed to compensate thermal movement in a multitude of copper pipeline circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated either end with a short copper spigot tail which can be connected to adjoining pipework with lead free solder copper or compression fittings. The working temperature / pressure will be governed by the fittings used but a rough guide is 6bar / 100.dg.c
RBU Twin sphere EPDM Union End Connectors.
Union ended Connectors have a standard length of 200mm +/- 5%, with a nylon reinforced EPDM twin sphere body terminated with galvanised malleable female BSP unions. The Maximum:- working pressure is 10bar / temperature 82.deg.C. Applications cover heating & chilled water services. The products must be installed in accordance with our fitting instructions and periodically inspected. Nitrile NBR connectors with brass unions are also available on request.
AU6 Union ended Expansion bellows
This range of bellows is designed to compensate thermal movement in heating and hot water circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated with either stainless steel or galvanised malleable iron female bellows. Maximum working pressure is 6bar / temperature 100.deg.C
CU6 Copper Spigot tail Bellows
This range of bellows is designed to compensate thermal movement in a multitude of copper pipeline circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated either end with a short copper spigot tail which can be connected to adjoining pipework with lead free solder copper or compression fittings. The working temperature / pressure will be governed by the fittings used but a rough guide is 6bar / 100.dg.c
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 1.1/4″ x 150mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 1.1/2″ x 150mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 2.0″ x 150mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 2.1/2″ x 150mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 3.0″ x 150mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 4.0″ x 150mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 5.0″ x 150mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 6.0″ x 150mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 8.0″ x 150mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 10.0″ x 150mm
BS10 Table D/E 150mm Length NOTESRBU Twin sphere EPDM Union End Connectors.
Union ended Connectors have a standard length of 200mm +/- 5%, with a nylon reinforced EPDM twin sphere body terminated with galvanised malleable female BSP unions. The Maximum:- working pressure is 10bar / temperature 82.deg.C. Applications cover heating & chilled water services. The products must be installed in accordance with our fitting instructions and periodically inspected. Nitrile NBR connectors with brass unions are also available on request.
AU6 Union ended Expansion bellows
This range of bellows is designed to compensate thermal movement in heating and hot water circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated with either stainless steel or galvanised malleable iron female bellows. Maximum working pressure is 6bar / temperature 100.deg.C
CU6 Copper Spigot tail Bellows
This range of bellows is designed to compensate thermal movement in a multitude of copper pipeline circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated either end with a short copper spigot tail which can be connected to adjoining pipework with lead free solder copper or compression fittings. The working temperature / pressure will be governed by the fittings used but a rough guide is 6bar / 100.dg.c
RBU Twin sphere EPDM Union End Connectors.
Union ended Connectors have a standard length of 200mm +/- 5%, with a nylon reinforced EPDM twin sphere body terminated with galvanised malleable female BSP unions. The Maximum:- working pressure is 10bar / temperature 82.deg.C. Applications cover heating & chilled water services. The products must be installed in accordance with our fitting instructions and periodically inspected. Nitrile NBR connectors with brass unions are also available on request.
AU6 Union ended Expansion bellows
This range of bellows is designed to compensate thermal movement in heating and hot water circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated with either stainless steel or galvanised malleable iron female bellows. Maximum working pressure is 6bar / temperature 100.deg.C
CU6 Copper Spigot tail Bellows
This range of bellows is designed to compensate thermal movement in a multitude of copper pipeline circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated either end with a short copper spigot tail which can be connected to adjoining pipework with lead free solder copper or compression fittings. The working temperature / pressure will be governed by the fittings used but a rough guide is 6bar / 100.dg.c
Euroflex BS 10:D/E (-20/100.C) EPDM Tied flanged bellows 1.1/4″ x 150mm
Euroflex BS 10:D/E (-20/100.C) EPDM Tied flanged bellows 1.1/2″ x 150mm
Euroflex BS 10:D/E (-20/100.C) EPDM Tied flanged bellows 2.0″ x 150mm
Euroflex BS 10:D/E (-20/100.C) EPDM Tied flanged bellows 2.1/2″ x 150mm
Euroflex BS 10:D/E (-20/100.C) EPDM Tied flanged bellows 3.0″ x 150mm
Euroflex BS 10: D (-20/100.C) EPDM Tied flanged bellows 4.0″ x 150mm
Euroflex BS 10: E (-20/100.C) EPDM Tied flanged bellows 4.0″ x 150mm
Euroflex BS 10:D/E (-20/100.C) EPDM Tied flanged bellows 5.0″ x 150mm
Euroflex BS 10:D/E (-20/100.C) EPDM Tied flanged bellows 6.0″ x 150mm
Euroflex BS 10:D/E (-20/100.C) EPDM Tied flanged bellows 8.0″ x 150mm
PN6 Variable Length NOTESRBU Twin sphere EPDM Union End Connectors.
Union ended Connectors have a standard length of 200mm +/- 5%, with a nylon reinforced EPDM twin sphere body terminated with galvanised malleable female BSP unions. The Maximum:- working pressure is 10bar / temperature 82.deg.C. Applications cover heating & chilled water services. The products must be installed in accordance with our fitting instructions and periodically inspected. Nitrile NBR connectors with brass unions are also available on request.
AU6 Union ended Expansion bellows
This range of bellows is designed to compensate thermal movement in heating and hot water circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated with either stainless steel or galvanised malleable iron female bellows. Maximum working pressure is 6bar / temperature 100.deg.C
CU6 Copper Spigot tail Bellows
This range of bellows is designed to compensate thermal movement in a multitude of copper pipeline circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated either end with a short copper spigot tail which can be connected to adjoining pipework with lead free solder copper or compression fittings. The working temperature / pressure will be governed by the fittings used but a rough guide is 6bar / 100.dg.c
RBU Twin sphere EPDM Union End Connectors.
Union ended Connectors have a standard length of 200mm +/- 5%, with a nylon reinforced EPDM twin sphere body terminated with galvanised malleable female BSP unions. The Maximum:- working pressure is 10bar / temperature 82.deg.C. Applications cover heating & chilled water services. The products must be installed in accordance with our fitting instructions and periodically inspected. Nitrile NBR connectors with brass unions are also available on request.
AU6 Union ended Expansion bellows
This range of bellows is designed to compensate thermal movement in heating and hot water circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated with either stainless steel or galvanised malleable iron female bellows. Maximum working pressure is 6bar / temperature 100.deg.C
CU6 Copper Spigot tail Bellows
This range of bellows is designed to compensate thermal movement in a multitude of copper pipeline circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated either end with a short copper spigot tail which can be connected to adjoining pipework with lead free solder copper or compression fittings. The working temperature / pressure will be governed by the fittings used but a rough guide is 6bar / 100.dg.c
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 1.1/4″ x 95mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 1.1/2″ x 95mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 2.0″ x 105mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 2.1/2″ x 115mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 3.0″ x 130mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 4.0″ x 135mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM Tied flanged bellows 6.0″ x 180mm
BS10 D/E Variable Length NOTESRBU Twin sphere EPDM Union End Connectors.
Union ended Connectors have a standard length of 200mm +/- 5%, with a nylon reinforced EPDM twin sphere body terminated with galvanised malleable female BSP unions. The Maximum:- working pressure is 10bar / temperature 82.deg.C. Applications cover heating & chilled water services. The products must be installed in accordance with our fitting instructions and periodically inspected. Nitrile NBR connectors with brass unions are also available on request.
AU6 Union ended Expansion bellows
This range of bellows is designed to compensate thermal movement in heating and hot water circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated with either stainless steel or galvanised malleable iron female bellows. Maximum working pressure is 6bar / temperature 100.deg.C
CU6 Copper Spigot tail Bellows
This range of bellows is designed to compensate thermal movement in a multitude of copper pipeline circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated either end with a short copper spigot tail which can be connected to adjoining pipework with lead free solder copper or compression fittings. The working temperature / pressure will be governed by the fittings used but a rough guide is 6bar / 100.dg.c
RBU Twin sphere EPDM Union End Connectors.
Union ended Connectors have a standard length of 200mm +/- 5%, with a nylon reinforced EPDM twin sphere body terminated with galvanised malleable female BSP unions. The Maximum:- working pressure is 10bar / temperature 82.deg.C. Applications cover heating & chilled water services. The products must be installed in accordance with our fitting instructions and periodically inspected. Nitrile NBR connectors with brass unions are also available on request.
AU6 Union ended Expansion bellows
This range of bellows is designed to compensate thermal movement in heating and hot water circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated with either stainless steel or galvanised malleable iron female bellows. Maximum working pressure is 6bar / temperature 100.deg.C
CU6 Copper Spigot tail Bellows
This range of bellows is designed to compensate thermal movement in a multitude of copper pipeline circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated either end with a short copper spigot tail which can be connected to adjoining pipework with lead free solder copper or compression fittings. The working temperature / pressure will be governed by the fittings used but a rough guide is 6bar / 100.dg.c
Euroflex BS10:D/E(-20/100.C) EPDM Tied flanged bellows 1.1/2″ x 95mm
Euroflex BS10:D/E(-20/100.C) EPDM Tied flanged bellows 2.0″ x 105mm
Euroflex BS10:D/E(-20/100.C) EPDM Tied flanged bellows 2.1/2″ x 115mm
Euroflex BS10:D/E(-20/100.C) EPDM Tied flanged bellows 3.0″ x 130mm
Euroflex BS10:D(-20/100.C) EPDM Tied flanged bellows 4.0″ x 135mm
Euroflex BS10:E(-20/100.C) EPDM Tied flanged bellows 4.0″ x 135mm
Euroflex BS10:D/E(-20/100.C) EPDM Tied flanged bellows 5.0″ x 170mm
Euroflex BS10:D/E(-20/100.C) EPDM Tied flanged bellows 6.0″ x 180mm
PN16 Variable Length NOTESRBU Twin sphere EPDM Union End Connectors.
Union ended Connectors have a standard length of 200mm +/- 5%, with a nylon reinforced EPDM twin sphere body terminated with galvanised malleable female BSP unions. The Maximum:- working pressure is 10bar / temperature 82.deg.C. Applications cover heating & chilled water services. The products must be installed in accordance with our fitting instructions and periodically inspected. Nitrile NBR connectors with brass unions are also available on request.
AU6 Union ended Expansion bellows
This range of bellows is designed to compensate thermal movement in heating and hot water circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated with either stainless steel or galvanised malleable iron female bellows. Maximum working pressure is 6bar / temperature 100.deg.C
CU6 Copper Spigot tail Bellows
This range of bellows is designed to compensate thermal movement in a multitude of copper pipeline circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated either end with a short copper spigot tail which can be connected to adjoining pipework with lead free solder copper or compression fittings. The working temperature / pressure will be governed by the fittings used but a rough guide is 6bar / 100.dg.c
RBU Twin sphere EPDM Union End Connectors.
Union ended Connectors have a standard length of 200mm +/- 5%, with a nylon reinforced EPDM twin sphere body terminated with galvanised malleable female BSP unions. The Maximum:- working pressure is 10bar / temperature 82.deg.C. Applications cover heating & chilled water services. The products must be installed in accordance with our fitting instructions and periodically inspected. Nitrile NBR connectors with brass unions are also available on request.
AU6 Union ended Expansion bellows
This range of bellows is designed to compensate thermal movement in heating and hot water circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated with either stainless steel or galvanised malleable iron female bellows. Maximum working pressure is 6bar / temperature 100.deg.C
CU6 Copper Spigot tail Bellows
This range of bellows is designed to compensate thermal movement in a multitude of copper pipeline circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated either end with a short copper spigot tail which can be connected to adjoining pipework with lead free solder copper or compression fittings. The working temperature / pressure will be governed by the fittings used but a rough guide is 6bar / 100.dg.c
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 1.1/4″ x 95mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 1.1/2″ x 95mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 2.0″ x 105mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 2.1/2″ x 115mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 3.0″ x 130mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 4.0″ x 135mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 5.0″ x 170mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM Tied flanged bellows 6.0″ x 180mm
Expansion Bellow 321 S/St 130mmf-f 304 S/S internal flow sleeve
Expansion Bellow 321 S/St 300mmf-f 304 S/S internal flow sleeve
Expansion Bellow 321 S/St 300mmf-f 304 S/S internal flow sleeve
Expansion Bellow 321 S/St 300mmf-f 304 S/S internal flow sleeve
Expansion Bellow 321 S/St 300mmf-f 304 S/S internal flow sleeve
Double Redband NOTESRBU Twin sphere EPDM Union End Connectors.
Union ended Connectors have a standard length of 200mm +/- 5%, with a nylon reinforced EPDM twin sphere body terminated with galvanised malleable female BSP unions. The Maximum:- working pressure is 10bar / temperature 82.deg.C. Applications cover heating & chilled water services. The products must be installed in accordance with our fitting instructions and periodically inspected. Nitrile NBR connectors with brass unions are also available on request.
AU6 Union ended Expansion bellows
This range of bellows is designed to compensate thermal movement in heating and hot water circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated with either stainless steel or galvanised malleable iron female bellows. Maximum working pressure is 6bar / temperature 100.deg.C
CU6 Copper Spigot tail Bellows
This range of bellows is designed to compensate thermal movement in a multitude of copper pipeline circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated either end with a short copper spigot tail which can be connected to adjoining pipework with lead free solder copper or compression fittings. The working temperature / pressure will be governed by the fittings used but a rough guide is 6bar / 100.dg.c
RBU Twin sphere EPDM Union End Connectors.
Union ended Connectors have a standard length of 200mm +/- 5%, with a nylon reinforced EPDM twin sphere body terminated with galvanised malleable female BSP unions. The Maximum:- working pressure is 10bar / temperature 82.deg.C. Applications cover heating & chilled water services. The products must be installed in accordance with our fitting instructions and periodically inspected. Nitrile NBR connectors with brass unions are also available on request.
AU6 Union ended Expansion bellows
This range of bellows is designed to compensate thermal movement in heating and hot water circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated with either stainless steel or galvanised malleable iron female bellows. Maximum working pressure is 6bar / temperature 100.deg.C
CU6 Copper Spigot tail Bellows
This range of bellows is designed to compensate thermal movement in a multitude of copper pipeline circuits. They also are suitable for potable water applications. The bellows comprise of 316 stainless steel convoluted bellows terminated either end with a short copper spigot tail which can be connected to adjoining pipework with lead free solder copper or compression fittings. The working temperature / pressure will be governed by the fittings used but a rough guide is 6bar / 100.dg.c