Untied
PN6 130mm Length NOTESRBS Flanged Rubber Moulded Bellows
RBS Moulded rubber bellows are designed to neutralise expansion & contraction movements, dampen noise and vibration, and adjust for small misalignments in pipelines. Our standard bellows are manufactured in three lengths, 130, 150 & BB in mm . Special length units can be produced to specification. The standard moulded section is EPDM for HEVAC and Nitrile NBR for gas applications Other models available are graded according to the band colour listed in the Product Guide.
The bellows are supplied with zinc plated carbon steel backing flanges drilled to the required flange specification. We also supply bellows with different flange specifications either end to adapt pipelines or equipment to a revised specification.
Particular care must be taken when fitting bellows to ensure its capability to absorb the pipe network movements and working temperature/pressure remain within its limits. Each bellows is provided with a data sheet and the installation must adhere to the instructions therein to ensure satisfactory service. Bellows are also supplied with tie rods to restrain undue pressure or weight loading whilst in service. Our standard product guide is available on request.
RBS Flanged Rubber Moulded Bellows
RBS Moulded rubber bellows are designed to neutralise expansion & contraction movements, dampen noise and vibration, and adjust for small misalignments in pipelines. Our standard bellows are manufactured in three lengths, 130, 150 & BB in mm . Special length units can be produced to specification. The standard moulded section is EPDM for HEVAC and Nitrile NBR for gas applications Other models available are graded according to the band colour listed in the Product Guide.
The bellows are supplied with zinc plated carbon steel backing flanges drilled to the required flange specification. We also supply bellows with different flange specifications either end to adapt pipelines or equipment to a revised specification.
Particular care must be taken when fitting bellows to ensure its capability to absorb the pipe network movements and working temperature/pressure remain within its limits. Each bellows is provided with a data sheet and the installation must adhere to the instructions therein to ensure satisfactory service. Bellows are also supplied with tie rods to restrain undue pressure or weight loading whilst in service. Our standard product guide is available on request.
Albion 427 BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 1.1/2″ x 130mm
Albion 427 BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 2.0″ x 130mm
Albion 427 BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 2.1/2″x 130mm
Albion 427 BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 3.0″ x 130mm
Albion 427 BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 4.0″ x 130mm
Albion 427 BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 5.0″ x 130mm
Albion 427 BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 6.0″ x 130mm
Albion 427 BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 8.0″ x 130mm
PN16 130mm Length NOTESRBS Flanged Rubber Moulded Bellows
RBS Moulded rubber bellows are designed to neutralise expansion & contraction movements, dampen noise and vibration, and adjust for small misalignments in pipelines. Our standard bellows are manufactured in three lengths, 130, 150 & BB in mm . Special length units can be produced to specification. The standard moulded section is EPDM for HEVAC and Nitrile NBR for gas applications Other models available are graded according to the band colour listed in the Product Guide.
The bellows are supplied with zinc plated carbon steel backing flanges drilled to the required flange specification. We also supply bellows with different flange specifications either end to adapt pipelines or equipment to a revised specification.
Particular care must be taken when fitting bellows to ensure its capability to absorb the pipe network movements and working temperature/pressure remain within its limits. Each bellows is provided with a data sheet and the installation must adhere to the instructions therein to ensure satisfactory service. Bellows are also supplied with tie rods to restrain undue pressure or weight loading whilst in service. Our standard product guide is available on request.
RBS Flanged Rubber Moulded Bellows
RBS Moulded rubber bellows are designed to neutralise expansion & contraction movements, dampen noise and vibration, and adjust for small misalignments in pipelines. Our standard bellows are manufactured in three lengths, 130, 150 & BB in mm . Special length units can be produced to specification. The standard moulded section is EPDM for HEVAC and Nitrile NBR for gas applications Other models available are graded according to the band colour listed in the Product Guide.
The bellows are supplied with zinc plated carbon steel backing flanges drilled to the required flange specification. We also supply bellows with different flange specifications either end to adapt pipelines or equipment to a revised specification.
Particular care must be taken when fitting bellows to ensure its capability to absorb the pipe network movements and working temperature/pressure remain within its limits. Each bellows is provided with a data sheet and the installation must adhere to the instructions therein to ensure satisfactory service. Bellows are also supplied with tie rods to restrain undue pressure or weight loading whilst in service. Our standard product guide is available on request.
Albion 420 BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 1.1/2″ x 130mm
Albion 420 BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 2.0″ x 130mm
Albion 420 BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 2.1/2″x 130mm
Albion 420 BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 3.0″ x 130mm
Albion 420 BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 4.0″ x 130mm
Albion 420 BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 5.0″ x 130mm
Albion 420 BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 6.0″ x 130mm
Albion 420 BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 8.0″ x 130mm
BS10 D/E 130mm Length NOTESRBS Flanged Rubber Moulded Bellows
RBS Moulded rubber bellows are designed to neutralise expansion & contraction movements, dampen noise and vibration, and adjust for small misalignments in pipelines. Our standard bellows are manufactured in three lengths, 130, 150 & BB in mm . Special length units can be produced to specification. The standard moulded section is EPDM for HEVAC and Nitrile NBR for gas applications Other models available are graded according to the band colour listed in the Product Guide.
The bellows are supplied with zinc plated carbon steel backing flanges drilled to the required flange specification. We also supply bellows with different flange specifications either end to adapt pipelines or equipment to a revised specification.
Particular care must be taken when fitting bellows to ensure its capability to absorb the pipe network movements and working temperature/pressure remain within its limits. Each bellows is provided with a data sheet and the installation must adhere to the instructions therein to ensure satisfactory service. Bellows are also supplied with tie rods to restrain undue pressure or weight loading whilst in service. Our standard product guide is available on request.
RBS Flanged Rubber Moulded Bellows
RBS Moulded rubber bellows are designed to neutralise expansion & contraction movements, dampen noise and vibration, and adjust for small misalignments in pipelines. Our standard bellows are manufactured in three lengths, 130, 150 & BB in mm . Special length units can be produced to specification. The standard moulded section is EPDM for HEVAC and Nitrile NBR for gas applications Other models available are graded according to the band colour listed in the Product Guide.
The bellows are supplied with zinc plated carbon steel backing flanges drilled to the required flange specification. We also supply bellows with different flange specifications either end to adapt pipelines or equipment to a revised specification.
Particular care must be taken when fitting bellows to ensure its capability to absorb the pipe network movements and working temperature/pressure remain within its limits. Each bellows is provided with a data sheet and the installation must adhere to the instructions therein to ensure satisfactory service. Bellows are also supplied with tie rods to restrain undue pressure or weight loading whilst in service. Our standard product guide is available on request.
Euroflex BS10:D/E (-20 / 100.C) flanged EPDM Bellows. 1.1/4″ x 130mm
Euroflex BS10:D/E (-20 / 100.C) flanged EPDM Bellows. 1.1/2″ x 130mm
Euroflex BS10:D/E (-20 / 100.C) flanged EPDM Bellows. 2.0″ x 130mm
Euroflex BS10:D/E (-20 / 100.C) flanged EPDM Bellows. 2.1/2″ x 130mm
Euroflex BS10:D/E (-20 / 100.C) flanged EPDM Bellows. 3.0″ x 130mm
Euroflex BS10: E (-20 / 100.C) flanged EPDM Bellows. 4.0″ x 130mm
Euroflex BS10: D (-20 / 100.C) flanged EPDM Bellows. 4.0″ x 130mm
Euroflex BS10:D/E (-20 / 100.C) flanged EPDM Bellows. 5.0″ x 130mm
Euroflex BS10:D/E (-20 / 100.C) flanged EPDM Bellows. 6.0″ x 130mm
Euroflex BS10:D/E (-20 / 100.C) flanged EPDM Bellows. 8.0″ x 130mm
PN6 150mm Length NOTESRBS Flanged Rubber Moulded Bellows
RBS Moulded rubber bellows are designed to neutralise expansion & contraction movements, dampen noise and vibration, and adjust for small misalignments in pipelines. Our standard bellows are manufactured in three lengths, 130, 150 & BB in mm . Special length units can be produced to specification. The standard moulded section is EPDM for HEVAC and Nitrile NBR for gas applications Other models available are graded according to the band colour listed in the Product Guide.
The bellows are supplied with zinc plated carbon steel backing flanges drilled to the required flange specification. We also supply bellows with different flange specifications either end to adapt pipelines or equipment to a revised specification.
Particular care must be taken when fitting bellows to ensure its capability to absorb the pipe network movements and working temperature/pressure remain within its limits. Each bellows is provided with a data sheet and the installation must adhere to the instructions therein to ensure satisfactory service. Bellows are also supplied with tie rods to restrain undue pressure or weight loading whilst in service. Our standard product guide is available on request.
RBS Flanged Rubber Moulded Bellows
RBS Moulded rubber bellows are designed to neutralise expansion & contraction movements, dampen noise and vibration, and adjust for small misalignments in pipelines. Our standard bellows are manufactured in three lengths, 130, 150 & BB in mm . Special length units can be produced to specification. The standard moulded section is EPDM for HEVAC and Nitrile NBR for gas applications Other models available are graded according to the band colour listed in the Product Guide.
The bellows are supplied with zinc plated carbon steel backing flanges drilled to the required flange specification. We also supply bellows with different flange specifications either end to adapt pipelines or equipment to a revised specification.
Particular care must be taken when fitting bellows to ensure its capability to absorb the pipe network movements and working temperature/pressure remain within its limits. Each bellows is provided with a data sheet and the installation must adhere to the instructions therein to ensure satisfactory service. Bellows are also supplied with tie rods to restrain undue pressure or weight loading whilst in service. Our standard product guide is available on request.
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 1.1/4″ x 150mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 1.1/2″ x 150mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 2.0″ x 150mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 2.1/2″ x 150mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 3.0″ x 150mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 4.0″ x 150mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 5.0″ x 150mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 6.0″ x 150mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 8.0″ x 150mm
PN16 150mm Length NOTESRBS Flanged Rubber Moulded Bellows
RBS Moulded rubber bellows are designed to neutralise expansion & contraction movements, dampen noise and vibration, and adjust for small misalignments in pipelines. Our standard bellows are manufactured in three lengths, 130, 150 & BB in mm . Special length units can be produced to specification. The standard moulded section is EPDM for HEVAC and Nitrile NBR for gas applications Other models available are graded according to the band colour listed in the Product Guide.
The bellows are supplied with zinc plated carbon steel backing flanges drilled to the required flange specification. We also supply bellows with different flange specifications either end to adapt pipelines or equipment to a revised specification.
Particular care must be taken when fitting bellows to ensure its capability to absorb the pipe network movements and working temperature/pressure remain within its limits. Each bellows is provided with a data sheet and the installation must adhere to the instructions therein to ensure satisfactory service. Bellows are also supplied with tie rods to restrain undue pressure or weight loading whilst in service. Our standard product guide is available on request.
RBS Flanged Rubber Moulded Bellows
RBS Moulded rubber bellows are designed to neutralise expansion & contraction movements, dampen noise and vibration, and adjust for small misalignments in pipelines. Our standard bellows are manufactured in three lengths, 130, 150 & BB in mm . Special length units can be produced to specification. The standard moulded section is EPDM for HEVAC and Nitrile NBR for gas applications Other models available are graded according to the band colour listed in the Product Guide.
The bellows are supplied with zinc plated carbon steel backing flanges drilled to the required flange specification. We also supply bellows with different flange specifications either end to adapt pipelines or equipment to a revised specification.
Particular care must be taken when fitting bellows to ensure its capability to absorb the pipe network movements and working temperature/pressure remain within its limits. Each bellows is provided with a data sheet and the installation must adhere to the instructions therein to ensure satisfactory service. Bellows are also supplied with tie rods to restrain undue pressure or weight loading whilst in service. Our standard product guide is available on request.
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 1.1/4″ x 150mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 1.1/2″ x 150mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 2.0″ x 150mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 2.1/2″ x 150mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 3.0″ x 150mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 4.0″ x 150mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 5.0″ x 150mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 6.0″ x 150mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 8.0″ x 150mm
BS10 Table D/E 150mm Length NOTESRBS Flanged Rubber Moulded Bellows
RBS Moulded rubber bellows are designed to neutralise expansion & contraction movements, dampen noise and vibration, and adjust for small misalignments in pipelines. Our standard bellows are manufactured in three lengths, 130, 150 & BB in mm . Special length units can be produced to specification. The standard moulded section is EPDM for HEVAC and Nitrile NBR for gas applications Other models available are graded according to the band colour listed in the Product Guide.
The bellows are supplied with zinc plated carbon steel backing flanges drilled to the required flange specification. We also supply bellows with different flange specifications either end to adapt pipelines or equipment to a revised specification.
Particular care must be taken when fitting bellows to ensure its capability to absorb the pipe network movements and working temperature/pressure remain within its limits. Each bellows is provided with a data sheet and the installation must adhere to the instructions therein to ensure satisfactory service. Bellows are also supplied with tie rods to restrain undue pressure or weight loading whilst in service. Our standard product guide is available on request.
RBS Flanged Rubber Moulded Bellows
RBS Moulded rubber bellows are designed to neutralise expansion & contraction movements, dampen noise and vibration, and adjust for small misalignments in pipelines. Our standard bellows are manufactured in three lengths, 130, 150 & BB in mm . Special length units can be produced to specification. The standard moulded section is EPDM for HEVAC and Nitrile NBR for gas applications Other models available are graded according to the band colour listed in the Product Guide.
The bellows are supplied with zinc plated carbon steel backing flanges drilled to the required flange specification. We also supply bellows with different flange specifications either end to adapt pipelines or equipment to a revised specification.
Particular care must be taken when fitting bellows to ensure its capability to absorb the pipe network movements and working temperature/pressure remain within its limits. Each bellows is provided with a data sheet and the installation must adhere to the instructions therein to ensure satisfactory service. Bellows are also supplied with tie rods to restrain undue pressure or weight loading whilst in service. Our standard product guide is available on request.
Euroflex BS 10:D/E (-20/100.C) EPDM flanged bellows 1.1/4″ x 150mm
Euroflex BS 10:D/E (-20/100.C) EPDM flanged bellows 1.1/2″ x 150mm
Euroflex BS 10:D/E (-20/100.C) EPDM flanged bellows 2.0″ x 150mm
Euroflex BS 10:D/E (-20/100.C) EPDM flanged bellows 2.1/2″ x 150mm
Euroflex BS 10:D/E (-20/100.C) EPDM flanged bellows 3.0″ x 150mm
Euroflex BS 10: D (-20/100.C) EPDM flanged bellows 4.0″ x 150mm
Euroflex BS 10: E (-20/100.C) EPDM flanged bellows 4.0″ x 150mm
Euroflex BS 10:D/E (-20/100.C) EPDM flanged bellows 5.0″ x 150mm
Euroflex BS 10:D/E (-20/100.C) EPDM flanged bellows 6.0″ x 150mm
Euroflex BS 10:D/E (-20/100.C) EPDM flanged bellows 8.0″ x 150mm
PN6 Variable Length NOTESRBS Flanged Rubber Moulded Bellows
RBS Moulded rubber bellows are designed to neutralise expansion & contraction movements, dampen noise and vibration, and adjust for small misalignments in pipelines. Our standard bellows are manufactured in three lengths, 130, 150 & BB in mm . Special length units can be produced to specification. The standard moulded section is EPDM for HEVAC and Nitrile NBR for gas applications Other models available are graded according to the band colour listed in the Product Guide.
The bellows are supplied with zinc plated carbon steel backing flanges drilled to the required flange specification. We also supply bellows with different flange specifications either end to adapt pipelines or equipment to a revised specification.
Particular care must be taken when fitting bellows to ensure its capability to absorb the pipe network movements and working temperature/pressure remain within its limits. Each bellows is provided with a data sheet and the installation must adhere to the instructions therein to ensure satisfactory service. Bellows are also supplied with tie rods to restrain undue pressure or weight loading whilst in service. Our standard product guide is available on request.
RBS Flanged Rubber Moulded Bellows
RBS Moulded rubber bellows are designed to neutralise expansion & contraction movements, dampen noise and vibration, and adjust for small misalignments in pipelines. Our standard bellows are manufactured in three lengths, 130, 150 & BB in mm . Special length units can be produced to specification. The standard moulded section is EPDM for HEVAC and Nitrile NBR for gas applications Other models available are graded according to the band colour listed in the Product Guide.
The bellows are supplied with zinc plated carbon steel backing flanges drilled to the required flange specification. We also supply bellows with different flange specifications either end to adapt pipelines or equipment to a revised specification.
Particular care must be taken when fitting bellows to ensure its capability to absorb the pipe network movements and working temperature/pressure remain within its limits. Each bellows is provided with a data sheet and the installation must adhere to the instructions therein to ensure satisfactory service. Bellows are also supplied with tie rods to restrain undue pressure or weight loading whilst in service. Our standard product guide is available on request.
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 1.1/4″ x 95mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 1.1/2″ x 95mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 2.0″ x 105mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 2.1/2″ x 115mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 3.0″ x 130mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 4.0″ x 135mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 5.0″ x 170mm
Euroflex BS EN1092-1:PN6(-20/100.C) EPDM flanged bellows 6.0″ x 180mm
BS10 D/E Variable Length NOTESRBS Flanged Rubber Moulded Bellows
RBS Moulded rubber bellows are designed to neutralise expansion & contraction movements, dampen noise and vibration, and adjust for small misalignments in pipelines. Our standard bellows are manufactured in three lengths, 130, 150 & BB in mm . Special length units can be produced to specification. The standard moulded section is EPDM for HEVAC and Nitrile NBR for gas applications Other models available are graded according to the band colour listed in the Product Guide.
The bellows are supplied with zinc plated carbon steel backing flanges drilled to the required flange specification. We also supply bellows with different flange specifications either end to adapt pipelines or equipment to a revised specification.
Particular care must be taken when fitting bellows to ensure its capability to absorb the pipe network movements and working temperature/pressure remain within its limits. Each bellows is provided with a data sheet and the installation must adhere to the instructions therein to ensure satisfactory service. Bellows are also supplied with tie rods to restrain undue pressure or weight loading whilst in service. Our standard product guide is available on request.
RBS Flanged Rubber Moulded Bellows
RBS Moulded rubber bellows are designed to neutralise expansion & contraction movements, dampen noise and vibration, and adjust for small misalignments in pipelines. Our standard bellows are manufactured in three lengths, 130, 150 & BB in mm . Special length units can be produced to specification. The standard moulded section is EPDM for HEVAC and Nitrile NBR for gas applications Other models available are graded according to the band colour listed in the Product Guide.
The bellows are supplied with zinc plated carbon steel backing flanges drilled to the required flange specification. We also supply bellows with different flange specifications either end to adapt pipelines or equipment to a revised specification.
Particular care must be taken when fitting bellows to ensure its capability to absorb the pipe network movements and working temperature/pressure remain within its limits. Each bellows is provided with a data sheet and the installation must adhere to the instructions therein to ensure satisfactory service. Bellows are also supplied with tie rods to restrain undue pressure or weight loading whilst in service. Our standard product guide is available on request.
Euroflex BS10:D/E(-20/100.C) EPDM flanged bellows 1.1/4″ x 95mm
Euroflex BS10:D/E(-20/100.C) EPDM flanged bellows 1.1/2″ x 95mm
Euroflex BS10:D/E(-20/100.C) EPDM flanged bellows 2.0″ x 105mm
Euroflex BS10:D/E(-20/100.C) EPDM flanged bellows 2.1/2″ x 115mm
Euroflex BS10:D/E(-20/100.C) EPDM flanged bellows 3.0″ x 130mm
Euroflex BS10:D(-20/100.C) EPDM flanged bellows 4.0″ x 135mm
Euroflex BS10:D/E(-20/100.C) EPDM flanged bellows 5.0″ x 170mm
Euroflex BS10:D/E(-20/100.C) EPDM flanged bellows 6.0″ x 180mm
Euroflex BS10:D/E(-20/100.C) EPDM Tied flanged bellows 1.1/4″ x 95mm
PN16 Variable Length NOTESRBS Flanged Rubber Moulded Bellows
RBS Moulded rubber bellows are designed to neutralise expansion & contraction movements, dampen noise and vibration, and adjust for small misalignments in pipelines. Our standard bellows are manufactured in three lengths, 130, 150 & BB in mm . Special length units can be produced to specification. The standard moulded section is EPDM for HEVAC and Nitrile NBR for gas applications Other models available are graded according to the band colour listed in the Product Guide.
The bellows are supplied with zinc plated carbon steel backing flanges drilled to the required flange specification. We also supply bellows with different flange specifications either end to adapt pipelines or equipment to a revised specification.
Particular care must be taken when fitting bellows to ensure its capability to absorb the pipe network movements and working temperature/pressure remain within its limits. Each bellows is provided with a data sheet and the installation must adhere to the instructions therein to ensure satisfactory service. Bellows are also supplied with tie rods to restrain undue pressure or weight loading whilst in service. Our standard product guide is available on request.
RBS Flanged Rubber Moulded Bellows
RBS Moulded rubber bellows are designed to neutralise expansion & contraction movements, dampen noise and vibration, and adjust for small misalignments in pipelines. Our standard bellows are manufactured in three lengths, 130, 150 & BB in mm . Special length units can be produced to specification. The standard moulded section is EPDM for HEVAC and Nitrile NBR for gas applications Other models available are graded according to the band colour listed in the Product Guide.
The bellows are supplied with zinc plated carbon steel backing flanges drilled to the required flange specification. We also supply bellows with different flange specifications either end to adapt pipelines or equipment to a revised specification.
Particular care must be taken when fitting bellows to ensure its capability to absorb the pipe network movements and working temperature/pressure remain within its limits. Each bellows is provided with a data sheet and the installation must adhere to the instructions therein to ensure satisfactory service. Bellows are also supplied with tie rods to restrain undue pressure or weight loading whilst in service. Our standard product guide is available on request.
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 1.1/4″ x 95mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 1.1/2″ x 95mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 2.0″ x 105mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 2.1/2″ x 115mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 3.0″ x 130mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 4.0″ x 135mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 5.0″ x 170mm
Euroflex BS EN1092-1:PN16(-20/100.C) EPDM flanged bellows 6.0″ x 180mm
Double Redband NOTESRBS Flanged Rubber Moulded Bellows
RBS Moulded rubber bellows are designed to neutralise expansion & contraction movements, dampen noise and vibration, and adjust for small misalignments in pipelines. Our standard bellows are manufactured in three lengths, 130, 150 & BB in mm . Special length units can be produced to specification. The standard moulded section is EPDM for HEVAC and Nitrile NBR for gas applications Other models available are graded according to the band colour listed in the Product Guide.
The bellows are supplied with zinc plated carbon steel backing flanges drilled to the required flange specification. We also supply bellows with different flange specifications either end to adapt pipelines or equipment to a revised specification.
Particular care must be taken when fitting bellows to ensure its capability to absorb the pipe network movements and working temperature/pressure remain within its limits. Each bellows is provided with a data sheet and the installation must adhere to the instructions therein to ensure satisfactory service. Bellows are also supplied with tie rods to restrain undue pressure or weight loading whilst in service. Our standard product guide is available on request.
RBS Flanged Rubber Moulded Bellows
RBS Moulded rubber bellows are designed to neutralise expansion & contraction movements, dampen noise and vibration, and adjust for small misalignments in pipelines. Our standard bellows are manufactured in three lengths, 130, 150 & BB in mm . Special length units can be produced to specification. The standard moulded section is EPDM for HEVAC and Nitrile NBR for gas applications Other models available are graded according to the band colour listed in the Product Guide.
The bellows are supplied with zinc plated carbon steel backing flanges drilled to the required flange specification. We also supply bellows with different flange specifications either end to adapt pipelines or equipment to a revised specification.
Particular care must be taken when fitting bellows to ensure its capability to absorb the pipe network movements and working temperature/pressure remain within its limits. Each bellows is provided with a data sheet and the installation must adhere to the instructions therein to ensure satisfactory service. Bellows are also supplied with tie rods to restrain undue pressure or weight loading whilst in service. Our standard product guide is available on request.